PRODUCT DESCRIPTION

A one part, ready-to-use, extra grip, external render bonding agent with added aggregate to provide a key

Bonding agent for exterior walls.

For use on concrete, brickwork, light blockwork.

Single application, render once cured.

Light green in colour for easy identification of treated areas.

Reduces suction on porous surfaces.

Improves adhesion on smooth surfaces.

Waterproof.

APPLICATION

For use as an effective bonding agent for render to concrete, brickwork and blockwork. And as a bonding agent to improve adhesion to smooth surfaces. For external use. Apply by brush or roller.

PRODUCT DESCRIPTION

A ready-to-use internal plaster bonding agent with added aggregate to provide a key prior to plastering on smooth surfaces.

Bonding agent for smooth surfaces.

Contains sand/aggregate to provide paster key.

Ready-to-use, one coat application.

Perfect for use on smooth substrates.

Pigmented yellow to identify treated areas.

Phthalate free formulation.

APPLICATION

As a primer/bonding agent aid prior to plastering on surfaces such as concrete, plaster and difficult, low or non-porous substrates. For internal use only, this product is not suitable for external applications. Apply by brush or roller.

PRODUCT DESCRIPTION

A high strength cement waterproofer for internal and external rendering, roof screeds, swimming pools, tanks, retaining walls, basement walls and reservoirs. Improves workability and plasticity of concrete and mortar in the wet state and resists water penetration even when under pressure.

Improves the plasticity of the mix making it easier to use.

Retards suction in multi-layer renders.

Reacts with free lime in the mortar to form hydrophobic crystals which block the pores, thereby improving the water resistance of the mix.

CE Approved: Conforms to EN934-3.

APPLICATION

Add to gauging water. To obtain maximum benefit the minimum amount of water should be used in the mix together with an appropriately rich cement and sand aggregate ratio. In application, the mortar must be well compacted to give a dense homogeneous body.

PRODUCT DESCRIPTION

A styrene butadiene copolymer latex, which increases flexibility of cement screeds and mortars and improves water and chemical resistance and durability. Suitable for internal and external floors and rendering in areas of continual or intermittent water and chemical contact. Excellent waterproofing admixture that improves adhesion of cementitious screeds and reduces shrinkage and cracking when repairing floor screeds. Also ideal as a bonding agent for new to old concrete.

APPLICATION

Can be used as a bonding agent, as an admixture or general purpose primer (tiling etc). For improving a mortar's, render's or floor screed's abrasion and chemical resistance. Key coat applications to substrates with a low porosity. For repair patching of concrete and cement screeds, to improve adhesion and flexibility of screeds.

PRODUCT DESCRIPTION

A one component, UV stable, solvent-based, mutli-purpose roof coating membrane. Designed to prevent the ingress of water whilst allowing any trapped moisture to escape and evaporate naturally. Manufactured with fibre reinforcement pre-dispersed in the can for ease of application.

Excellent adhesion.

Application in damp weather.

Instant protection.

Superb solar reflectivity.

Reinforced membrane.

One coat application.

Seamless.

Fully flexible.

Unaffected by temperature.

Economical.

APPLICATION

For renovation of all types of roof structure. Provides waterproof protection of : flat and pitched roofs, corrugated asbestos, roof lights, flashings, roofing felt, gutters, slate, asphalt, lead, glasshouses, metal and fibregalss. Will also bridge small gaps and cracks. Treat all details first, in areas where excessive movement may occur additional reinforcement can be incorporated into the coating. Sealacryl can be applied in one coat, but experience has shown that a two coat application ensures a greater uniformity of coating thickness. Do not thin. Apply using either a brush or roller.

PRODUCT DESCRIPTION

Embossed to assist mortar adhesion.

Durable with proven performance over many years.

Manufactured from the highest quality reprocessed materials.

Remains flexible – even at low temperatures.

Safe and clean to handle.

Suitable for use in horizontal and vertical applications throughout domestic construction.

CE Approved: Conforms to the requirements of EN14909.

APPLICATION

Installation should be according to the code of practice CP102:1973 and normal DPC good practice procedures set in BS 5628 should be followed.

Some brief guidelines on how to use the DPC are supplied below:

- For external walls the DPC should be applied 150mm a fresh bed of mortar, completely free of projections that may puncture the material or impede the material from lying flat. When joining two pieces of DPC they should be lapped over each other by at least 100mm.

- For internal walls, DPC should be installed at the base of load bearing walls and linked with any adjoining DPM. The DPC should be at least the width the partition it is applied to and lapped by at least 100mm when two DPC's are joined.

PRODUCT DESCRIPTION

A one part, solvent-free, permanently flexible waterproofing material based on hybrid technology.

- Ultimate alternative to bitumen membranes.

- Quick and easy to use.

- Cold applied.

- Odourless drying and curing without release of chemicals.

- Paintable with most paints (acrylic, alkyd, polyurethane, etc.)

- Application possible on damp surfaces.

APPLICATION

Suitable for wet room tanking, groundwork tanking and waterproofing balconies and terraces (topped with a screed and tiles). Offering high UV resistance, this crack bridging, non-shrinking, non-cracking material is also ideal for repairing flat roofs, sloping roofs, leaking flashing, guttering and roof lights and cracked roofing panels.

Based on hybrid technology, EasiSeal Pro does not harden under cold conditions and has very high stability to temperature variations (from -50°C to +120°C), to UV radiation and to external chemical attack. Excellent resistance to ageing, ultra-violet and discoloration. EasiSeal Pro has excellent adhesion to concrete, brick, stone, lead, metals, glass, wood, bitumen/asphalt*, uPVC and GRP roof panels and most plastics. Can be used on vertical and horizontal surfaces. Can also be used for providing protection to wooden fence posts and stakes to prevent wet rot when buried under the ground. Creates an impermeable seal to repel water damage. *On bitumen/asphalt surfaces EasiSeal Pro must be used in conjunction with EasiSeal Pro Primer.

This can also be used in conjunction with a mesh scrim to re-enforce installations.

PRODUCT DESCRIPTION

A one part, solvent-free, permanently flexible waterproofing material based on hybrid technology.

- Ultimate alternative to bitumen membranes.

- Quick and easy to use.

- Cold applied.

- Odourless drying and curing without release of chemicals.

- Paintable with most paints (acrylic, alkyd, polyurethane, etc.)

- Application possible on damp surfaces.

APPLICATION

Suitable for wet room tanking, groundwork tanking and waterproofing balconies and terraces (topped with a screed and tiles). Offering high UV resistance, this crack bridging, non-shrinking, non-cracking material is also ideal for repairing flat roofs, sloping roofs, leaking flashing, guttering and roof lights and cracked roofing panels.

Based on hybrid technology, EasiSeal Pro does not harden under cold conditions and has very high stability to temperature variations (from -50°C to +120°C), to UV radiation and to external chemical attack. Excellent resistance to ageing, ultra-violet and discoloration. EasiSeal Pro has excellent adhesion to concrete, brick, stone, lead, metals, glass, wood, bitumen/asphalt*, uPVC and GRP roof panels and most plastics. Can be used on vertical and horizontal surfaces. Can also be used for providing protection to wooden fence posts and stakes to prevent wet rot when buried under the ground. Creates an impermeable seal to repel water damage. *On bitumen/asphalt surfaces EasiSeal Pro must be used in conjunction with EasiSeal Pro Primer.

This can also be used in conjunction with a mesh scrim to re-enforce installations.

PRODUCT DESCRIPTION

A one-part, moisture curing, polyurethane adhesive and sealant, with a shore A hardness of 40, for the construction and transport industries. Produces tough, elastic seals and joints with excellent adhesion characteristics which helps dampen vibration. Also oil resistant making it ideal for the engineering industry.

CE Approved: Conforms to EN15651-1,4; F EXT-INT, PW INT.

APPLICATION

Can be used for sealing and bonding in engineering, construction, automotive and marine applications. It is ideal for use on concrete, wood, metals, GRP, rubbers and most common building materials, It is also suitable for fixing wooden floors.

PRODUCT DESCRIPTION

A one-part, moisture curing, polyurethane adhesive and sealant, with a shore A hardness of 40, for the construction and transport industries. Produces tough, elastic seals and joints with excellent adhesion characteristics which helps dampen vibration. Also oil resistant making it ideal for the engineering industry.

CE Approved: Conforms to EN15651-1,4; F EXT-INT, PW INT.

APPLICATION

Can be used for sealing and bonding in engineering, construction, automotive and marine applications. It is ideal for use on concrete, wood, metals, GRP, rubbers and most common building materials, It is also suitable for fixing wooden floors.

PRODUCT DESCRIPTION

A one-part, moisture curing, polyurethane adhesive and sealant, with a shore A hardness of 40, for the construction and transport industries. Produces tough, elastic seals and joints with excellent adhesion characteristics which helps dampen vibration. Also oil resistant making it ideal for the engineering industry.

CE Approved: Conforms to EN15651-1,4; F EXT-INT, PW INT.

APPLICATION

Can be used for sealing and bonding in engineering, construction, automotive and marine applications. It is ideal for use on concrete, wood, metals, GRP, rubbers and most common building materials, It is also suitable for fixing wooden floors.

PRODUCT DESCRIPTION

A low modulus neutral cure (LMN) silicone for perimeter sealing of external door and window frames. Rapid curing with good adhesion properties and additional uPVC adhesion promoters and extended open time for ease of tooling.

CE Approved: Conforms to EN15651-1 F EXT-INT.

APPLICATION

For perimeter sealing of external wood, aluminium and uPVC door and window frames and for weather sealing and flexible jointing of infill panels. Can also be used on concrete, plaster and mortar. Note: Not suitable for use with aquaria or for use on bitumen or asphalt. This product cannot be over-painted. Risk of yellowing in low UV light situations (e.g. if used indoors) whilst curing. Note: Sealant may crack if exposed to movement before it is suitably cured, therefore joints should be protected from movement for at least 3 hours after application.

PRODUCT DESCRIPTION

A low modulus neutral cure (LMN) silicone for perimeter sealing of external door and window frames. Rapid curing with good adhesion properties and additional uPVC adhesion promoters and extended open time for ease of tooling.

CE Approved: Conforms to EN15651-1 F EXT-INT.

APPLICATION

For perimeter sealing of external wood, aluminium and uPVC door and window frames and for weather sealing and flexible jointing of infill panels. Can also be used on concrete, plaster and mortar. Note: Not suitable for use with aquaria or for use on bitumen or asphalt. This product cannot be over-painted. Risk of yellowing in low UV light situations (e.g. if used indoors) whilst curing. Note: Sealant may crack if exposed to movement before it is suitably cured, therefore joints should be protected from movement for at least 3 hours after application.

PRODUCT DESCRIPTION

A low modulus neutral cure (LMN) silicone for perimeter sealing of external door and window frames. Rapid curing with good adhesion properties and additional uPVC adhesion promoters and extended open time for ease of tooling.

CE Approved: Conforms to EN15651-1 F EXT-INT.

APPLICATION

For perimeter sealing of external wood, aluminium and uPVC door and window frames and for weather sealing and flexible jointing of infill panels. Can also be used on concrete, plaster and mortar. Note: Not suitable for use with aquaria or for use on bitumen or asphalt. This product cannot be over-painted. Risk of yellowing in low UV light situations (e.g. if used indoors) whilst curing. Note: Sealant may crack if exposed to movement before it is suitably cured, therefore joints should be protected from movement for at least 3 hours after application.

PRODUCT DESCRIPTION

A low modulus neutral cure (LMN) silicone for perimeter sealing of external door and window frames. Rapid curing with good adhesion properties and additional uPVC adhesion promoters and extended open time for ease of tooling.

CE Approved: Conforms to EN15651-1 F EXT-INT.

APPLICATION

For perimeter sealing of external wood, aluminium and uPVC door and window frames and for weather sealing and flexible jointing of infill panels. Can also be used on concrete, plaster and mortar. Note: Not suitable for use with aquaria or for use on bitumen or asphalt. This product cannot be over-painted. Risk of yellowing in low UV light situations (e.g. if used indoors) whilst curing. Note: Sealant may crack if exposed to movement before it is suitably cured, therefore joints should be protected from movement for at least 3 hours after application.

PRODUCT DESCRIPTION

A low modulus neutral cure (LMN) silicone for perimeter sealing of external door and window frames. Rapid curing with good adhesion properties and additional uPVC adhesion promoters and extended open time for ease of tooling.

CE Approved: Conforms to EN15651-1 F EXT-INT.

APPLICATION

For perimeter sealing of external wood, aluminium and uPVC door and window frames and for weather sealing and flexible jointing of infill panels. Can also be used on concrete, plaster and mortar. Note: Not suitable for use with aquaria or for use on bitumen or asphalt. This product cannot be over-painted. Risk of yellowing in low UV light situations (e.g. if used indoors) whilst curing. Note: Sealant may crack if exposed to movement before it is suitably cured, therefore joints should be protected from movement for at least 3 hours after application.

PRODUCT DESCRIPTION

A low modulus neutral cure (LMN) silicone for perimeter sealing of external door and window frames. Rapid curing with good adhesion properties and additional uPVC adhesion promoters and extended open time for ease of tooling.

CE Approved: Conforms to EN15651-1 F EXT-INT.

APPLICATION

For perimeter sealing of external wood, aluminium and uPVC door and window frames and for weather sealing and flexible jointing of infill panels. Can also be used on concrete, plaster and mortar. Note: Not suitable for use with aquaria or for use on bitumen or asphalt. This product cannot be over-painted. Risk of yellowing in low UV light situations (e.g. if used indoors) whilst curing. Note: Sealant may crack if exposed to movement before it is suitably cured, therefore joints should be protected from movement for at least 3 hours after application.

PRODUCT DESCRIPTION

A high strength bonding system comprising a cyanoacrylate adhesive with an aerosol activator to ensure full and rapid curing on acid surfaces. Can be used for bonding MDF, wood, rubber and most plastics. Instant bonding properties considerably reduce assembly times for mitre joints expecially where precision instant bonding is required. Cures in approximately 10 seconds. Pack includes 1 tin of Activator (200ml) and 1 bottle of HVC Superglue (50g).

APPLICATION

Spray aerosol lightly over one face of the joint and allow to dry. If possible, use on the least visible face of the completed joint. Apply activator to one surface and allow solvent to evaporate. Apply adhesive to the other surface and then bring together immediately. Apply gentle pressure.

PRODUCT DESCRIPTION

A ready-to-use internal plaster bonding agent with added aggregate to provide a key prior to plastering on smooth surfaces.

Bonding agent for smooth surfaces.

Contains sand/aggregate to provide paster key.

Ready-to-use, one coat application.

Perfect for use on smooth substrates.

Pigmented yellow to identify treated areas.

Phthalate free formulation.

APPLICATION

As a primer/bonding agent aid prior to plastering on surfaces such as concrete, plaster and difficult, low or non-porous substrates. For internal use only, this product is not suitable for external applications. Apply by brush or roller.

For tipper style vehicles to safeguard tools against theft and weathering.

One simple job always leads to another, but the Mobi keeps you mobile and your tools secure.

Move between jobs using the lockable docking station and make short work of every task, every time, using the right tool - no more back and forth.

Highly secure - including the reinforced lid and VAULTLOCK™ locking system - means you can get on with the job.

The Mobi is certified by Secured by Design, the UK’s Police approved standard.

Independently tested, approved and certified by Sold Secure and Secured by Design

Built with a 3mm steel construction with fully phosphated anti-corrosion protection

Fitted with two highly effective 70mm anti-pick, anti-drill and anti-rust stainless steel disc locks

The VAULTLOCK™ is positioned deep within the body of the box, protected by a hardened steel plates

The reinforced lid protects against attacks with crowbars or car jacks

Drop down recessed handles with rubber pads provide maximum comfort when lifting

Wide mouth drop front for greater access and visibility of contents inside

Bolt-on lid handle designed to shear off if attacked

Strong gas strut support arms ensures a soft open and close lid action. Positioned through the side of the box to optimise storage space

4 reinforced fixing points for easy installation to the vehicle floor - instructions and anti-theft bolts supplied

Sloping lid to channel water away

Supplied with 3 keys (per lock)

COATING and FINISHING TYPE: Fully Phosphated and Powder-Coated

CONSTRUCTION MATERIAL: 3mm Sheet Steel

FITTING TYPE: Four reinforced Fixing Points with M10 Bolts and Shear Nuts

LOCKING SYSTEM TYPE: 70mm Disc Locks

KEYS: Supplied with 3 x unique 3 Van Vault dimple keys

EXTERNAL SIZE: 1815 (L) x 560 (D) x 490 (H)

INTERNAL SIZE: 1720 (L) x 435 (D) x 420 (H)

PRODUCT TYPE: Secure Storage Vehicle Box

WEIGHT: 80kg

The original high security steel storage box for commercial vehicles

Tool theft is rife and on the rise. Meet that challenge with the toughest, most secure version of the original Van Vault 2.

All your valuable kit is stored and secured behind a heavy duty steel body with a reinforced lid and advanced protection VAULTLOCK™ locking system.

Van Vault 2 is the first secure storage product designed for vehicles to have been independently tested and certified by Secured by Design, the UK’s Police approved standard.

If you can’t afford to be without your tools, you can’t afford to be without the Van Vault 2.

• Independently tested, approved and certified by Sold Secure and Secured by Design.
• Built with a 3mm steel construction and with fully phosphated anti-corrosion protection.
• Fitted with a highly effective 70mm anti-pick, anti-drill and anti-rust stainless steel disc lock.
• The VAULTLOCK™ is positioned deep within the body of the box, protected by a hardened steel plate.
• The reinforced lid protects against attacks with crowbars or car jacks.
• Drop down recessed handles with rubber pads provide maximum comfort when lifting.
• Wide mouth drop front for greater access and visibility of contents inside.
• Strong gas strut support arm ensures a soft open and close lid action. Positioned through the side of the box to optimise storage space.
• Bolt-on lid handle designed to shear off if attacked
• 4 reinforced fixing points for easy installation to the vehicle floor - instructions and anti-theft bolts supplied
• Supplied with 3 keys 
• 
  
•  
• COATING and FINISHING TYPE: Fully Phosphated and Powder-Coated
• CONSTRUCTION MATERIAL: 3mm Sheet Steel
• FITTING TYPE: Four reinforced Fixing Points with M10 Bolts and Shear Nuts
• LOCKING SYSTEM TYPE: 70mm Disc Lock
• KEYS: Supplied with 3 x unique 3 Van Vault dimple keys
• EXTERNAL SIZE: 935 (L) x 590 (D) x 494 (H)
• INTERNAL SIZE: 790 (L) x 430 (D) x 478 (H)
• PRODUCT TYPE: Secure Storage Vehicle Box
• WEIGHT: 48kg

For open backed vehicles to safeguard tools against theft and weathering.

Your tools go where you go in the Outback, shielded from the elements and from theft.

Bolted down and reinforced, your kit is kept secure against the bulkhead of the vehicle, and to hand when you need it most.

Out and about, or left stationary, your tools are always protected.

The Outback is certified by the UK’s official police initiative - Secured by Design.

• Independently tested, approved and certified by Sold Secure and Secured by Design
• Built with a 3mm steel construction and with fully phosphated anti-corrosion protection
• Fitted with a highly effective 70mm anti-pick, anti-drill and anti-rust stainless steel disc lock
• The VAULTLOCK™ is positioned deep within the body of the box, protected by a hardened steel plate
• The reinforced lid protects against attacks with crowbars or car jacks
• Drop down recessed handles with rubber pads provide maximum comfort when lifting
• Wide mouth drop front for greater access and visibility of contents inside
• Bolt-on lid handle designed to shear off if attacked
• Strong gas strut support arms ensures a soft open and close lid action. Positioned through the side of the box to optimise storage space
• 4 reinforced fixing points for easy installation to the vehicle floor - instructions and anti-theft bolts supplied
• Supplied with 3 keys (per lock)
• 
  
• COATING and FINISHING TYPE: Fully Phosphated and Powder-Coated
• CONSTRUCTION MATERIAL: 3mm Sheet Steel
• FITTING TYPE: Four reinforced Fixing Points with M10 Bolts and Nuts
• LOCKING SYSTEM TYPE: 70mm Disc Locks
• KEYS: Supplied with 3 x unique 3 Van Vault dimple keys
• EXTERNAL SIZE: 1335 (L) x 558 (D) x 490 (H)
• INTERNAL SIZE: 1244 (L) x 430 (D) x 484 (H)
• PRODUCT TYPE: Secure Storage Vehicle Box
• WEIGHT: 60kg

Lightweight tough 1.5mm thick aluminium

• Holds 100M of copper in 34 x 3m lengths


• Supplied with roof fixing mounts


• Dual end loading


• Injection moulded end cap with steel insert - prevents risk of spillage during heavy braking


• 40mm solid brass and stianless steel padlock supplied with 3 keys (10g)


• UK Design

Wide base secure drawer for storing and protecting power tools in commercial vehicles.

Maximise the floor space in your vehicle with the Slim Slider.

Get quick access to vital tools on the job while keeping things organised.

Constructed to take the weight of other equipment - means you can stack on-top and not lose any valuable van space.

Along with all the best security features, this low slider keeps tools together and thieves out.

The Slim Slider is certified by Secured by Design, the UK’s Police approved standard.

• Independently tested, approved and certified by Sold Secure and Secured by Design
• Built with a solid steel construction with fully phosphated anti-corrosion protection
• Fitted with a highly effective 70mm anti-pick, anti-drill and anti-rust stainless steel disc lock
• The VAULTLOCK™ is positioned deep within the body of the drawer protected by a hardened steel plate
• Heavy duty roller bearings combined with full drawer runners provide a smooth drawer action
• Pre-drilled fixing points for easy installation to the vehicle floor - instructions and anti-theft bolts supplied
• Floor mounts between wheel arches
• Steel grip handles for easy opening
• Slip resistant top surface for stacking equipment and materials on top
• Dividers are available as an optional extra
• Supplied with 3 keys
• Load capacity: 300kg

• 
  
• COATING and FINISHING TYPE: Fully Phosphated and Powder-Coated CONSTRUCTION MATERIAL: Sheet Steel
• FITTING TYPE: Four reinforced Fixing Points with M10 Bolts and Shear Nuts
• LOCKING SYSTEM TYPE: 70mm Disc Lock
• KEYS: Supplied with 3 x unique 3 Van Vault dimple keys
• EXTERNAL SIZE: 1000 (L) x 1200 (D) x 227 (H)
• INTERNAL SIZE: 910 (L) x 1115 (D) x 175 (H)
• PRODUCT TYPE: Secure Storage Vehicle Drawer
• WEIGHT: 77kg

Secure drawer solution for protecting hand and power tools in commercial vehicles.

Customise your vehicle storage to suit. The Stacker XL provides lots of secure drawer space for valuable tools.

Useful on its own, the Stacker XL also expands your other Van Vault storage setup by combining with the Van Vault 2 or another Stacker XL, stack together without taking up any more floor space in your van.

The smooth-action drawer secures your tools but keeps them accessible.

The Stacker XL is certified by Secured by Design, the UK’s Police approved standard.

• Independently tested, approved and certified by Sold Secure and Secured by Design
• Built with a solid steel construction with fully phosphated anti-corrosion protection
• Fitted with a highly effective 70mm anti-pick, anti-drill and anti-rust stainless steel disc lock
• The VAULTLOCK™ is positioned deep within the body of the drawer protected by a hardened steel plate
• Heavy duty roller bearings combined with full drawer runners provide a smooth drawer action
• Pre-drilled fixing points for easy installation to the vehicle floor - instructions and anti-theft bolts supplied
• Soft foam insert protects tools from damage
• Steel grip handles for easy opening
• Supplied with 3 keys
• Load capacity: 300kg

• 
  
• COATING and FINISHING TYPE: Fully Phosphated and Powder-Coated CONSTRUCTION MATERIAL: Sheet Steel
• FITTING TYPE: Four reinforced Fixing Points with M10 Bolts and Shear Nuts
• LOCKING SYSTEM TYPE: 70mm Disc Lock
• KEYS: Supplied with 3 x unique 3 Van Vault dimple keys
• EXTERNAL SIZE: 910 (L) x 485 (D) x 313 (H)
• INTERNAL SIZE: 885 (L) x 390 (D) x 227 (H)
• PRODUCT TYPE: Secure Storage Vehicle Drawer
• WEIGHT: 39kg

The ultimate storage solution, comprising of the toughest anti-theft features onsite

Size mm (external): 1282 (L) x 735 (D) x 1280 (H)

Size mm (internal): 1121 (L) x 665 (D) x 1111 (H)

Opening Dimensions mm : 1121 (L) x 625 (D) x 1334 (H)

Weight: 173Kg

• 2 x 5-lever BS Locks


• Supplied with 2 keys per lock


• High security concealed split piano hinge


• Fully phosphated anti-corrosion protection


• Gas strut support arms


• Solid lock lid stay system


• Low visibility black body


• Fitted shelf brackets


• Steel handles with easy grip to lift and shift between locations


• Fork lifting points to ensure trouble-free loading and transportation between sites


• UK Design

The fold-away gas cage is an easy to assemble, secure solution for storing hazardous cylinders

Size mm (external): 1700 (L) x 880 (W) x 1735 (H)

Weight: 130Kg

• Easy assembly


• Secure storage


• Flat pack for convenient, easy storage flat pack design


• Manufactured from mild steel sections between 3 and 5mm thick


• Covered with 2? x 2? 10g mild steel, copper coated weld mesh


• Iron phosphated pre-treatment and powder coated


• Dimensions: Body 62.6kg, lid 14kg, 2 x doors 10.1kg and 12.5kg, 2 x internal shelves (735 x 750mm) 7.5kg each, 1 internal shelf (1500 x 700mm) 14kg


• Comes with signs


• UK Design


• Padlock not included

Purpose built on site storage for hazardous chemicals

Size mm (external): 1282 (L) x 735 (D) x 1220 (H)

Size mm (internal): 1245 (L) x 665 (D) x 1111 (H)

Opening Dimensions mm : 1121 (L) x 625 (D) x 1360 (H)

Weight: 182Kg

• Manufactured for storage of hazardous chemicals


• Fully ventilated with gauze flame arrestors


• Fitted with brass overspill tap


• Elevation tray included for spillages


• Internal shelf


• Manufactured from 2.5mm sheet steel


• Fully phosphated and powder coated for a durable finish


• 2 x 5-lever BS Locks


• 2 keys supplied


• Fork lift points for easy loading


• UK Design

Ideal for storing valuable equipment and flammable liquids securely on site

Size mm (external): 1282 (L) x 735 (D) x 1220 (H)

Size mm (internal): 575 per section (L) x 580 (D) x 595 (H)

Opening Dimensions mm : 1030 (L) x 580 (D) x 420 (H)

• Two compartments to separate tools and fuel


• Fitted with brass overspill tap (fuel side only)


• 2 x 5-lever BS Locks


• High security concealed split piano lid


• Heavy gauge 2.5mm sheet steel construction


• Fully ventilated with flame arrestors (fuel side only)


• UK Design

Purpose built on site storage for flammable liquids

Size mm (external): 1150 (L) x 585 (D) x 595 (H)

Size mm (internal): 922 (L) x 566 (D) x 490 (H)

Opening Dimensions mm : 420 (L) x 580 (D) x 420 (H)

Weight: 97Kg

• Manufactured for the storage of flammable liquids


• Fully ventilated with gauze flame arrestors


• Fitted with brass overspill tap


• Elevation tray included


• Manufactured from 2.5mm sheet steel


• Fully phosphated and powder coated for a durable finish


• 2 x 5-lever BS locks


• 2 x keys


• Fork lift points for easy loading


• UK Design

Providing maximum secure storage space on construction sites and other workplaces

Size mm (external): 1190 (L) x 645 (D) x 690 (H)

Size mm (internal): 1150 (L) x 580 (D) x 595 (H)

Opening Dimensions mm : 1031 (L) x 580 (D) x 420 (H)

Weight: 60Kg

• Integrated single pin hinge


• Fully phosphated anti-corrosion protection


• Gas strut support arms


• Solid lock 'lid stay' system


• Flush comfort grip handles


• Low visibility black body


• Tough sheet steel construction with durable anti-corrosion protection


• 2 hardened steel 5-lever BS locks resist drilling and picking


• Supplied with 2 keys per lock


• Fork lift points for easy loading


• UK Design

Purpose built on site storage for hazardous chemicals

Size mm (external): 1150 (L) x 580 (D) x 575 (H)

Size mm (internal): 922 (L) x 566 (D) x 490 (H)

Opening Dimensions mm : 1030 (L) x 580 (D) x 420 (H)

Weight: 97Kg

• Manufactured for storage of hazardous chemicals


• Fully ventilated with gauze flame arrestors


• Fitted with brass overspill tap


• Elevation tray included for spillages


• Manufactured from 2.5mm sheet steel


• Fully phosphated and powder coated for a durable finish


• 2 x 5-lever BS Locks


• 2 keys supplied


• Fork lift points for easy loading


• UK Design

Lightweight tough 1.5mm thick aluminium

• Holds 100M of copper in 34 x 3m lengths


• Supplied with roof fixing mounts


• Dual end loading


• Injection moulded end cap with steel insert - prevents risk of spillage during heavy braking


• 40mm solid brass and stianless steel padlock supplied with 3 keys (10g)


• UK Design

Wide base secure drawer for storing and protecting power tools in commercial vehicles.

Maximise the floor space in your vehicle with the Slim Slider.

Get quick access to vital tools on the job while keeping things organised.

Constructed to take the weight of other equipment - means you can stack on-top and not lose any valuable van space.

Along with all the best security features, this low slider keeps tools together and thieves out.

The Slim Slider is certified by Secured by Design, the UK’s Police approved standard.

• Independently tested, approved and certified by Sold Secure and Secured by Design
• Built with a solid steel construction with fully phosphated anti-corrosion protection
• Fitted with a highly effective 70mm anti-pick, anti-drill and anti-rust stainless steel disc lock
• The VAULTLOCK™ is positioned deep within the body of the drawer protected by a hardened steel plate
• Heavy duty roller bearings combined with full drawer runners provide a smooth drawer action
• Pre-drilled fixing points for easy installation to the vehicle floor - instructions and anti-theft bolts supplied
• Floor mounts between wheel arches
• Steel grip handles for easy opening
• Slip resistant top surface for stacking equipment and materials on top
• Dividers are available as an optional extra
• Supplied with 3 keys
• Load capacity: 300kg

• 
  
• COATING and FINISHING TYPE: Fully Phosphated and Powder-Coated CONSTRUCTION MATERIAL: Sheet Steel
• FITTING TYPE: Four reinforced Fixing Points with M10 Bolts and Shear Nuts
• LOCKING SYSTEM TYPE: 70mm Disc Lock
• KEYS: Supplied with 3 x unique 3 Van Vault dimple keys
• EXTERNAL SIZE: 1000 (L) x 1200 (D) x 227 (H)
• INTERNAL SIZE: 910 (L) x 1115 (D) x 175 (H)
• PRODUCT TYPE: Secure Storage Vehicle Drawer
• WEIGHT: 77kg

Secure drawer solution for protecting hand and power tools in commercial vehicles.

Customise your vehicle storage to suit. The Stacker XL provides lots of secure drawer space for valuable tools.

Useful on its own, the Stacker XL also expands your other Van Vault storage setup by combining with the Van Vault 2 or another Stacker XL, stack together without taking up any more floor space in your van.

The smooth-action drawer secures your tools but keeps them accessible.

The Stacker XL is certified by Secured by Design, the UK’s Police approved standard.

• Independently tested, approved and certified by Sold Secure and Secured by Design
• Built with a solid steel construction with fully phosphated anti-corrosion protection
• Fitted with a highly effective 70mm anti-pick, anti-drill and anti-rust stainless steel disc lock
• The VAULTLOCK™ is positioned deep within the body of the drawer protected by a hardened steel plate
• Heavy duty roller bearings combined with full drawer runners provide a smooth drawer action
• Pre-drilled fixing points for easy installation to the vehicle floor - instructions and anti-theft bolts supplied
• Soft foam insert protects tools from damage
• Steel grip handles for easy opening
• Supplied with 3 keys
• Load capacity: 300kg

• 
  
• COATING and FINISHING TYPE: Fully Phosphated and Powder-Coated CONSTRUCTION MATERIAL: Sheet Steel
• FITTING TYPE: Four reinforced Fixing Points with M10 Bolts and Shear Nuts
• LOCKING SYSTEM TYPE: 70mm Disc Lock
• KEYS: Supplied with 3 x unique 3 Van Vault dimple keys
• EXTERNAL SIZE: 910 (L) x 485 (D) x 313 (H)
• INTERNAL SIZE: 885 (L) x 390 (D) x 227 (H)
• PRODUCT TYPE: Secure Storage Vehicle Drawer
• WEIGHT: 39kg

Designed for tradespeople wanting to move from job to job with their tools locked in securely.

One simple job always leads to another, but the Mobi keeps you mobile and your tools secure.

Move between jobs using the lockable docking station and make short work of every task, every time, using the right tool - no more back and forth.

Highly secure - including the reinforced lid and VAULTLOCK™ locking system - means you can get on with the job.

The Mobi is certified by Secured by Design, the UK’s Police approved standard.

• Independently tested, approved and certified by Sold Secure and Secured by Design
• Built with a 2mm steel construction and with fully phosphated anti-corrosion protection
• Fitted with two highly effective 70mm anti-pick, anti-drill and anti-rust stainless steel disc locks
• The VAULTLOCK™ is positioned deep within the body of the box, protected by a hardened steel plate
• The reinforced lid protects against attacks with crowbars or car jacks
• Wide mouth drop front for greater access and visibility of contents inside
• Bolt-on lid handle designed to shear off if attacked
• 4 reinforced fixing points for easy installation to the vehicle floor - instructions and anti-theft bolts supplied
• Supplied with 3 keys (per lock)
• Secures to included mountable base plate
• 
  
• COATING and FINISHING TYPE: Fully Phosphated and Powder-Coated CONSTRUCTION MATERIAL: 2mm Sheet Steel
• FITTING TYPE: Four reinforced Fixing Points with M10 Bolts and Shear Nuts
• LOCKING SYSTEM TYPE: 70mm Disc Locks
• KEYS: Supplied with 3 x unique 3 Van Vault dimple keys
• EXTERNAL SIZE: 780 (L) x 415 (D) x 370 (H)
• INTERNAL SIZE: 690 (L) x 325 (D) x 360 (H)
• PRODUCT TYPE: Secure Storage Vehicle Box
• WEIGHT: 32.25kg

The original high security steel storage box for commercial vehicles

Tool theft is rife and on the rise. Meet that challenge with the toughest, most secure version of the original Van Vault 2.

All your valuable kit is stored and secured behind a heavy duty steel body with a reinforced lid and advanced protection VAULTLOCK™ locking system.

Van Vault 2 is the first secure storage product designed for vehicles to have been independently tested and certified by Secured by Design, the UK’s Police approved standard.

If you can’t afford to be without your tools, you can’t afford to be without the Van Vault 2.

• Independently tested, approved and certified by Sold Secure and Secured by Design.
• Built with a 3mm steel construction and with fully phosphated anti-corrosion protection.
• Fitted with a highly effective 70mm anti-pick, anti-drill and anti-rust stainless steel disc lock.
• The VAULTLOCK™ is positioned deep within the body of the box, protected by a hardened steel plate.
• The reinforced lid protects against attacks with crowbars or car jacks.
• Drop down recessed handles with rubber pads provide maximum comfort when lifting.
• Wide mouth drop front for greater access and visibility of contents inside.
• Strong gas strut support arm ensures a soft open and close lid action. Positioned through the side of the box to optimise storage space.
• Bolt-on lid handle designed to shear off if attacked
• 4 reinforced fixing points for easy installation to the vehicle floor - instructions and anti-theft bolts supplied
• Supplied with 3 keys 
• 
  
•  
• COATING and FINISHING TYPE: Fully Phosphated and Powder-Coated
• CONSTRUCTION MATERIAL: 3mm Sheet Steel
• FITTING TYPE: Four reinforced Fixing Points with M10 Bolts and Shear Nuts
• LOCKING SYSTEM TYPE: 70mm Disc Lock
• KEYS: Supplied with 3 x unique 3 Van Vault dimple keys
• EXTERNAL SIZE: 935 (L) x 590 (D) x 494 (H)
• INTERNAL SIZE: 790 (L) x 430 (D) x 478 (H)
• PRODUCT TYPE: Secure Storage Vehicle Box
• WEIGHT: 48kg

The M18 FUEL 30/34 degree Framing Nailer sets the new standard for wireless framing nailers. Thanks to a nitrogen spring mechanism, POWERSTATE brushless motor and REDLINK Intelligence, this nailer offers you pneumatic performance and the ease and freedom of wireless power.

With this framing nail machine you can handle even the most demanding mounting applications.

To keep you productive and efficient all day long, the frame gun fires 3 nails per second with zero run-in time, meaning that a nail is fired as soon as you pull the trigger.

In addition, the cordless nail maker only works with our REDLITHIUM batteries and sealed compressed nitrogen to power every nail, completely eliminating the cost of gas cartridges versus competitor nailers.

The M18 FUEL 30/34 degree framing nailer delivers the pneumatic performance and durability that professional carpenters and builders expect without the hassle of a compressor and hose or gas cartridge.

Battery capacity: 5 Ah

Battery Type: Li-ion

Number of Batteries Supplied: 2

Cycle nails per battery (max): 700

Nail Diameter: 2.8 - 3.3 mm

Nail length: 50-90 mm

Supplied in: HD Box

Weight, incl. Battery: 4.7 kg

Angle: 30/34

Charger included: Yes

Voltage : 18v

Features:

Rear handle design with blade left allows the user excellent cut line visibility

190 mm blade which gives a 66 mm depth of cut, enabling the saw to cut 3 stacked OSB boards

53? bevel capacity

Magnesium shoe reduces weight and maximises durability

Durable metal rafter hang hook for work space management and safe

Integrated LED light for workspace illumination

Specification:

No load speed: 5800rpm

Voltage: 18V

Blade diameter: 190mm

Max. cutting depth 45?: 48mm

Max. cutting depth 90?: 66mm

Weight: 5.2kg

SOLD AS BARE UNIT BATTERIES & CHARGER NOT INCLUDED

Excellent power to consistently seat nails sub-flush to the surface in hardwoods

Ready to Fire Nail Technology eliminates ramp-up time between each nail discharge

No gas cartridges and no cleaning required, designed to deliver durability and reliability to the most demanding users with very little maintenance

Smaller nail hole, the exact size of the nail head leaving a neater finish

Different shaped noses stored on board allows the user to get the best finish no matter what the application

Small work contact bracket allows the user to fire and sink nails at a more acute angle

Tool-free, quick and easy depth adjustment to assure nails are driven sub-flush

Dry-Fire lockout stops the tool being fired when there are no nails left in the magazine

Fires up to 1200 nails per charge on a RED LITHIUM?-ION 2.0 Ah battery pack for maximum productivity

Quick access and easy clearing of jams

LED work light illuminates the work surface for better placement of nails

Flexible battery system: works with all MILWAUKEE? M18? batteries

Battery type: Li-ion

Batteries supplied: 2 x 2Ah Batteries

Collation angle: 0

Cycle rate: 900 h

Magazine capacity: 110 nails

Nail diameter: 1.2 mm

Nail type: 16 / 54 mm

Supplied in: No Kitbox

Voltage: 18v

Features

• Best-in-class power to consistently seat nails sub-flush to the surface in hardwoods.
• Ready to Fire Nail Technology eliminates ramp-up time between each nail discharge.
• No gas cartridges and no cleaning required, designed to deliver durability and reliability to the most demanding users with very little maintenance.
• Two mode selection allows for sequential fire for precision or bump fire for speed.
• Tool-free, quick and easy depth adjustment to assure nails are driven sub-flush.
• Dry-Fire lockout stops the tool being fired when there are no nails left in the magazine.
• Fires up 800 nails per charge on a REDLITHIUM-ION™ 2.0 Ah battery pack for maximum productivity.
• Quick access and easy clearing of jams.
• LED work light illuminates the work surface for better placement of nails.

Specification

• Voltage : 18 volt
• Battery pack capacity : 5.0ah
• Battery type : Li-ion
• Cycle rate : 900
• Collation angle : 20?
• Nail diameter : 1.6 mm
• Nail type : 32 / 63 mm
• Supplied in : HD Box
• Charger supplied : 80min
• No. of batteries supplied : 2
• Magazine capacity : 110 nails
• Weight (with battery pack) : 3.3kg

Supplied with :

• 2 x 5.0Ah li-ion batteries
• Fast Charger
• Dynacase.

Features:

Best-in-class power to consistently seat nails sub-flush to the surface in hardwoods

Ready to Fire Nail Technology eliminates ramp-up time between each nail discharge

No gas cartridges and no cleaning required, designed to deliver durability and reliability to the most demanding users with very little maintenance

Smaller nail hole, the exact size of the nail head leaving a neater finish

Different designed noses stored on board allows the user to get the best finish no matter what the application

Small work contact bracket allows the user to fire and sink nails at a more acute angle

Tool-free, quick and easy depth adjustment to assure nails are driven sub-flush

Dry-Fire lockout stops the tool being fired when there are no nails left in the magazine

Fires up to 1200 nails per charge on a RED LITHIUM-ION 2.0 Ah battery pack for maximum productivity (not included)

Quick access and easy clearing of jams

LED work light illuminates the work surface for better placement of nails

Flexible battery system: works with all Milwaukee M18 batteries

Specification:

Battery type: Li-ion

Charger supplied: 0

Collation angle [degrees]: 0

Cycle rate: 900

Magazine capacity nails: 110

Nail diameter [mm]: 1.2

Nail type (mm): 16 / 54

No. of batteries supplied: 0

Voltage (V): 18

Supplied With:

1 x Nailgun

1 x Carry case

Features

Milwaukee powerful 3500 rpm motor easily cuts most timber construction materials.

REDLINK™ overload protection electronics in tool and battery pack deliver best in class system durability.

Large 50 bevel facility.

Magnesium upper and lower guards provide best in class durability for impact resistance.

Excellent visibility of cutting line.

Electronic motor brake, saw blade stops within seconds.

Individual battery cell monitoring optimises tool run time and ensures long term pack durability.

Fuel gauge displays remaining charge.

REDLITHIUM-ION™ battery pack delivers up to 2x more run time, up to 20% more power, up to 2x more battery life and operates better down to -20?C than other lithium-ion technologies.

Flexible battery system: works with all Milwaukee? M18™ batteries.

Supplied with 24 tooth saw blade, parallel guide, dust port and allen key.

Specification

Sound pressure level : 83 dB(A)

Sound pressure level uncertainty : 3 dB(A)

Sound power level : 93 dB(A)

Sound power level uncertainty : 3 dB(A)

Vibration level : <2.5 m/s?

Vibration uncertainty : 1.5 m/s?

Bore size : 15.87 mm

No load speed : 3,500 rpm

Voltage : 18 volt

Battery pack capacity : n/a

Battery type : Li-ion

Supplied in : n/a

Charger supplied : n/a

No. of batteries supplied : 0

Blade diameter : 165 mm

Weight (with battery pack) : n/a

Weight : 3.1 kg

Max. cutting depth (@ 45?) : 39 mm

Max. cutting depth (@ 90?) : 55 mm

Complete With

2 X 4.0Ah Li Ion Batteries

Charger

Kit Bag

OVERVIEW

3 brightness settings with a maximum output of 2000 lumens

Multi-position handle with threads for tripod mounting

Rated to IP54 for protection against dust and water ingress

OVERVIEW

Variable 3000, 1800, 1000 lumen output with broad and even beam pattern

Tripod base and battery compartment ensures low centre of gravity for maximum stability

Lamp head rotates and pivots for directional control of light output

Up to 5.1 hours’ runtime on max setting using 9.0Ah XR FLEXVOLT battery pack

Variable height 2.2m maximum height, collapsing down to 1m for transport and storage

Ingress Protection rated to IP55 against dust and moisture

STANDARD

Battery and charger sold separately

Defender's best selling 25M reel, light industrial 16A 2 way reel has a strong steel A frame providing a secure base. The neon indicator enables users to easily see from a distance when the power is switched on. Also includes a thermal cut out to prevent overheating.

Industry standard VDE approved cable

Steel A frame gives a robust and stable base

Easy to see on site - bright yellow indicating 110V

Neon power indicator

Thermal overload protection prevents overheating

Integrated carry handle

Specification

Outlets - 2x 16A 110V

Ingress rating - IP44

Standard - BSEN 61242:1998

Weight - 4KG

Dimensions - 320 x 240 x 190

Cable - 25m, 1.5mm, 3 core, H05 - VVF VDE

The Makita 14.4v/18v Li-ion Led Lamp Pivoting Head Bare Unit DML802 is an ideal torch for trade professionals as well as DIYers that are working in low-lighting conditions. It is designed with a durable aluminium flashlight head and a metal hang hook to ensure hands-free use and a torch that can withstand the vigorous conditions of a worksite. It has a 12 position pivoting head with stops between 60º and 110º to ensure difficult angles can be seen in a better light. The multi-faceted reflector controls the direction and the spread of the light for increased control by the user. The LED in this torch provides a sharp, round spotlight of 160 lumens. This is a naked machine, body only, it is not supplied with a battery or charger.

Features and Benefits:

Multi-faceted reflector controla the direction and spread of the light

Metal Hang hook for convenience

12 position pivoting flashlight head

Technical Specifications:

Voltage - 18V

Battery Type - Li-ion

Lumens - 160lm

Supplied With:

1 x 14.4v/18v Li-ion Led Lamp Pivoting Head Bare Unit

The Makita DML812 18v LXT Flashlight is a powerful torch with a maximum luminious flux of 1,250 lm. The flashlight has 4 distinct lighting modes available - Spot, Flood, Spot+Flood and Strobe. Whilst in Spot mode, the torch offers users a long beam distance of 640m. A versatile light source, the torch's head can be adjusted 90 degrees to achieve the desired position. In addition, the incorporated bracket hook allows the torch to be hung from scaffolding, pipes, and joists. Ideal for illuminating the work spaces of trade professionals and DIY enthusiasts.

Features and Benefits:

Long beam distance up to 640m*1 in Spot mode

Bright light with a max luminous flux of 1,250 lm

4 in 1

4 lighting modes are available: Spot mode, Flood mode*2, Spot+Flood mode, Strobe mode*3

Mode switch cycles through Flood, Spot, Spot & Flood. Press and hold for Strobe

Variable angle head can be moved through 90 ° as desired

Bracket hook, enables torch to be hung from joists, pipes or scaffolding

*1: The distance at which the illuminance decreases to 0.25 lx

*2: For wide illumination of a target area

*3: The flashlight flashes in Spot+Flood mode.

Technical Specification:

Voltage: 18V or 14.4V

Illuminance (Lx) Spot 71,000, Flood 520, Spot/Flood 51,000

Luminous flux (lm) Spot 600, Flood 1,000, Spot/Flood 1,250

Runtime (BL1860B) Spot 10 hrs, Flood 7.5 hrs, Spot/Flood 6.0 hrs

Weight 1.6kg

Supplied With:

1 x DML812 18v LXT Flashlight Bare Unit

The Makita DML808 is a 18V LXT Li-Ion L.E.D. Torch that provides bright illumination, versatility, and convenience on the jobsite. The high-luminance single L.E.D. flashlight provides a full 200 lumens of light and a sharp, round spotlight. Features include a beam adjustment from spot to flood, and a 12-position pivoting head with positive stops from 60° to 110°. Supplied as a body only / naked machine, batteries and charger available separately.

Features and Benefits:

Zoom function – irradiation range can be adjusted for up to 5.5 times larger lighting area

4.9W LED – high illuminance single white LED with improved multifaceted reflector for even illumination

Ergonomic design – handle with soft grip and light weight design

Powered by the platform behind one of the worlds largest range of 18V power tools, it delivers up to 32hrs of runtime

12 Pivot positions with positive stops allow you to set down the light and adjust its position for the perfect angle of light, where ever you need it

The Makita DML805 corded and cordless LED worklight is compatible with both 14.4V and 18V Makita Li-ion batteries. It also will happily run on mains electricity with the 240 Volt 3 pin plug. Comes as a body only so no battery or charger is supplied.

Features:

Can be powered by both AC and DC (14.4v/18v Li-ion battery)

Battery capacity warning lamp

360 degrees vertical light angle adjustment

Twenty 0.5W white-light LEDs; deliver bright and even light

Carrying handle for easy transport that also serves as a hanging hook

Power supply cord 2.5m