MAKITA HP001GZ 40VOLT XGT 2 SPEED BRUSHLESS COMBI DRILL BODY ONLY

The Makita HP001G is the hammer drill / screwdriver variant of the DF001G XGT Drill Driver. In addition to everything that the DF001G can do, you can also use this machine to drill in stone. Furthermore, it is the same powerful machine, which can work with hose drills up to 50 mm and holesaws up to 152 mm. And of course it is also equipped with Active Feedback sensing Technology (AFT), which automatically switches off the machine when the drill is clamped in the material. This protects your wrist and does not unbalance you. It remains a compactly built machine, even with added hammer drill function.

Supplied body only – this tool requires Makita 40v XGT lithium-ion battery packs to operate.

Say hello to Makita 40v Max XGT – The new standalone system that will stand side-by-side with the industry-leading Makita LXT System. XGT is a genuine solution for high demand industrial applications, a combination of innovative tool design and higher output batteries, providing a genuine solution for high demand industrial users as well.

XGT FEATURES

• XGT – A combination of innovative tool design and higher output batteries, providing a genuine solution for high demand industrial users
• XGT and LXT will co-exist to provide users with an unmatched line-up of cordless tools for the professional trade
• The introduction of a charging adaptor has enabled consumers to charge both LXT & XGT batteries when using the XGT charger
• The XGT range of tools and batteries come with a built-in program, providing digital communication between the battery and tool. Allowing not only for the battery to talk with tool but also the tool to talk to the battery
• Incorporation of tool design, higher output batteries and built in communication program makes XGT the best high demand system on the market
• XGT batteries and tools are built to withstand tough environmental conditions. This means that they have been built to be withstand splashing or spraying water from any angle
• The XGT charging system fully charges batteries in as little as 28 minutes

HP001G USER BENEFITS

• Brushless motor
• Forward / reverse rotation
• Single sleeve keyless chuck allows for easy bit installation/removal by one hand
• Electric brake
• 2 mechanical gears
• Variable speed control by trigger
• LED job light
• Active Feedback Sensing Technology (AFT): Shuts down the tool to protect the user if the rotation speed suddenly slows down
• Electronic clutch
• Digital display for visual confirmation of selected torque
• Excellent performance in continuous heavy duty applications

HP001G SPECIFICATION

• Voltage: 40v XGT
• Power Output (W): TBC
• Soft Application Max Torque (Nm): 68
• Hard Application Max Torque (Nm): 140
• Torque Settings: 21 (Hi) / 41 (Lo) + Drill
• Brake Type: Electric
• No. of Gears: 2
• LED Job Light: Yes / Twin / After-glow
• Battery Capacity Indicator: Yes
• Battery Compatibility: 40v Max Lithium-Ion (XGT)
• Rotation: Forward / Reverse
• Variable Speed Control Trigger: Yes
• No Load Speed (RPM) High: 0-2600
• No Load Speed (RPM) Med: N/A
• No Load Speed (RPM) Low: 0-650
• Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal
• Chuck Capacity (mm): 13
• Screw Capacity: Machine Screw (mm): 6
• Screw Capacity: Wood Screw (mm): 10 x 90
• Drill Capacity: Concrete (mm): 20
• Drill Capacity: Metal (mm): 20
• Drill Capacity: Wood (mm): 76
• Impact Rate (BPM) High: 0-39000
• Impact Rate (BPM) Med: N/A
• Impact Rate (BPM) Low: 0-9750
• Overall Length (mm): 182
• Net Weight (Approx. Kg) with 2.5Ah Batt: 2.7
• Net Weight (Approx. Kg) with 4.0Ah Batt: 3.0
• Brushless Motor: Yes

HP001G NOISE & VIBRATION

• Noise Sound Pressure: 85 dB(A)
• Noise Sound Power: 96 dB(A)
• Noise K Factor: 3 dB(A)
• Vibration K Factor: 1.5 m/sec²
• Vibration Impact Drilling in Concrete: 6.0 m/sec²
• Vibration Drilling into Metal: 2.5 m/sec² or Less